Datasheet (Hydra GT300L (300 Ltrs) Grease Trap)- Click here
Note: Please check the dimensions are suitable for your requirement before ordering.
Features & Advantages
- Suitable for 300 covers a day.
- Suitable in the commercial kitchens with medium to high use.
- Can be installed required, Below or Above the ground.
- Two chambers model.
- A 5 litre container of Grease-Eater Enzyme solution free with the product.
- Helps your kitchen conform to guidelines regarding waste water disposal into the sewage system.
- Made using strong HDPE material.
How To Use
- A complete ready to install unit delivered at your doorstep
- Only a qualified plumber should carry out the installation
- You may require pipe size reducers for inlet pipe and 110 rubber coupler
- Regularly add Hydra Grease-Eater Liquid to the grease trap to prevent bad odours and choking. Add the liquid either manually or via Grease-Eater Auto- Dosing Pump
Grease-Eater Dosing Chart |
Grease Trap Fitted | No Grease Trap Fitted |
Size Grease Trap | Daily Dose Amount | Drainage Run | Daily Dose Amount |
Up To 50 litres | 150 ml a day | Up To 50 metres | 150 ml a day |
50-200 litres | 170 ml a day | 15 - 50 metres | 170 ml a day |
200-300 litres | 200 ml a day | 50 - 75 metres | 200 ml a day |
Over 300 litres | 300 ml a day | Over 75 metres | 300 ml a day |
Over 1,000 litres | 400 ml a day | | |
Over 2,000 litres | 500 ml a day | | |
The best time to apply Grease Eater Enzyme Liquid is an hour after the kitchen close to avoid any boiling water, detergents or fats. |
An important regulation:
According to the Building Regulations 2000 (H1 Foul water drainage - 2.21) amended on 2002 an effective method of grease removal is mandatory to install in all commercial kitchens of hot food premises.
Description
Hydra GT300L (300Ltrs) Grease Trap is an important commercial kitchen equipment to support proper functioning of the drainage system and intercept FOG's from entering into the effluent treatment facility where it may prove hazardous to the environment. Restaurant Grease Traps as well as Grease Trap for kitchen function by slowing down of the water that flows through them and allowing the liquefied FOG's to cool up and remain in the interceptor. Grease traps releasing relatively lesser contaminated water into the sewage system. The Hydra Grease Trap range from Hydra is made up of High Density and Medium Density Polyethylene. The material is very tough; however care should be taken while installation, unloading and handling of the unit.
Technical Information:
Model: Hydra GT300L (300Ltrs) Grease Trap
Location: Above or below Ground Installation
Approx No. of covers: 300
Flow L/sec: 2.0
Weight: 20 kg
Pipe Size: 110mm
Dimensions : 1550mm x 570mm x 530mm
Hydra Grease Trap Range - Sizes** |
Model | Location* | Approx Covers** | Flow L/Sec** | Dimensions** L x W x H | Pipe Size |
Hydra ST1 - 18 Litre Grease Trap (4 gallon) | Above Ground | 12 | 0.15 | 475x250x320mm 18.7x9.8x12.6inch weight 3 kilo | 50mm |
Hydra ST2 B - 55 Litre Grease Trap (12 gallon) | Above Ground | 35 | 0.25 | 500x294x510mm 19.7x11.6x20.1inch weight 5 kilo | 50mm |
Hydra ST2 A - 55 Litre Grease Trap (12 gallon) | Above Ground | 35 | 0.25 | 605x400x380mm 23.8x15.7x14.9inch weight 5 kilo | 50mm |
Hydra ST3 - 70 Litre Grease Trap (15 gallon) | Above Ground | 70 | 0.35 | 470x470x475mm 18.5x18.5x18.7inch weight 7 kilo | 50mm |
Hydra GT150L (150 Ltrs) Grease Trap (35 gallon) | Above or Below Ground | 150 | 0.75 | 750x570x530mm 29.5x22.4x20.9inch weight 24 kilo | 110mm |
Hydra GT300L (300 Ltrs) Grease Trap (70 gallon) | Above or Below Ground | 300 | 2 | 1550x570x530mm 61.0x22.4x20.9inch weight 20 kilo | 110mm |
Hydra GT450L (450 Ltrs) Grease Trap (100 gallon) | Above or Below Ground | 450 | 2.5 | 1670x690x530mm 65.7x27.2x20.9inch weight 30 kilo | 110mm |
** Dimensions do not include external pipe work.All the pipe work are manufactured from black polyethylene have lids, internal baffles and connectors for standard pipe-work either 50mm or 100mm depending on model. |